Factory-direct animatronic models from Zigong, China dinosaurobotx@gmail.com WhatsApp +86 139 9009 5528

Animatronic Dilophosaurus Model (Indoor Exhibit)

Animatronic Dilophosaurus Model (Indoor Exhibit) built with programmable motion and sound for indoor and outdoor dinosaur exhibits.

Animatronic Dilophosaurus Model (Indoor Exhibit)
Dinosaur model

A Moving Dinosaur Built for Public Display

Animatronic Dilophosaurus Model (Indoor Exhibit) is produced on a welded steel frame sized for the torque of repeated head, jaw and tail movement, with the mechanism layout mapped against the animal's anatomy before the exterior is applied.

Geared motors and tuned linkages drive the action of Animatronic Dilophosaurus Model (Indoor Exhibit), while a programmable control board manages sensor triggers, timing, roar sound and the speed of each movement so the display behaves predictably in a busy venue.

The hand-finished skin of Animatronic Dilophosaurus Model (Indoor Exhibit) is textured and painted to match approved references, and the unit can be specified for indoor halls or outdoor trails with sealed joints and a protected control box.

For Animatronic Dilophosaurus Model (Indoor Exhibit), the indoor setup is tuned for lower sound and a controlled footprint on finished floors.

Request Pricing

Specifications

Product type
Life-size animatronic dinosaur
Frame
Welded corrosion-treated steel
Drive
Geared motors with programmable control
Exterior
Silicone and hand-finished paint
Trigger
Infrared, timer, remote or button
Power
Mains with low-voltage control circuit
SKU
SR-005

Engineering and Frame

The frame inside Animatronic Dilophosaurus Model (Indoor Exhibit) is welded from steel sections and corrosion treated, then fitted with motors rated for continuous use so the weight of the body and the range of each joint stay within safe limits.

Motion and Sound

Animatronic Dilophosaurus Model (Indoor Exhibit) can be programmed with head turns, jaw opening, arm motion, tail sweeps and breathing effects, each synchronized with a species call that can be adjusted in volume or disabled for quieter spaces.

Materials and Finish

Moving areas of Animatronic Dilophosaurus Model (Indoor Exhibit) use flexible silicone while static parts use rigid shells, and the surface is hand painted and clear coated so scales and color remain consistent through handling and display.

Ordering and Installation

We confirm the dimensions, motion list and power requirements for Animatronic Dilophosaurus Model (Indoor Exhibit) in writing, then support sea or air freight and can arrange on-site assembly and staff training for larger exhibits.

Typical Applications

Animatronic Dilophosaurus Model (Indoor Exhibit) suits theme parks, outdoor trails, science museums, touring exhibitions and zoos, where the model can be grouped into a full prehistoric zone or displayed as a single centerpiece.

Species Profile and Real-Life Scale

The real animal behind Animatronic Dilophosaurus Model (Indoor Exhibit) lived in the Early Jurassic river and lake margins, and the display is scaled so visitors can read its proportions from the main walkway rather than from a single fixed spot. At full size, Animatronic Dilophosaurus Model (Indoor Exhibit) reaches roughly 6 to 7 m long and carries a frame and body in the region of a lightly built frame around several hundred kilograms; these figures are confirmed against the venue drawing before production so the footprint and any clearance are agreed in advance.

Motion Sequence and Behavior Detail

The action sequence for Animatronic Dilophosaurus Model (Indoor Exhibit) is built around a paired crest head lift, with each movement driven by a separate geared motor and timed from the programmable control board. Beyond that, Animatronic Dilophosaurus Model (Indoor Exhibit) adds jaw opening with a soft call and neck frill extension where specified, and the order can be rearranged to suit the zone without changing the hardware.

Anatomy and Hand-Finished Detail

The sculpt of Animatronic Dilophosaurus Model (Indoor Exhibit) emphasizes the twin plate-like crests on the head and the slender, notched snout, and these areas are shaped over the moving joints so the skin flexes naturally instead of creasing where the mechanism turns. Flexible silicone is used on the moving surfaces of Animatronic Dilophosaurus Model (Indoor Exhibit), while rigid shells carry the static areas; the paint is built up in layers and clear coated so the color and texture stay consistent through handling and cleaning.

Mounting, Power and Viewing Distance

Animatronic Dilophosaurus Model (Indoor Exhibit) is delivered on a steel base that is bolted or weighted to the floor, and the control box is mounted within reach yet hidden from the public side; mains power feeds a low-voltage control circuit with a single isolation point. The viewing line for Animatronic Dilophosaurus Model (Indoor Exhibit) keeps the full body and the the twin plate-like crests on the head and the slender in frame, with the sensor zone placed inside that line so the action starts as a group approaches.

Project Planning and Commissioning

For larger rollouts, Animatronic Dilophosaurus Model (Indoor Exhibit) is planned as part of a zone schedule: we confirm the electrical supply, base fixing, visitor flow and sensor coverage, then commission the figure on site, run a motion and aging test, and hold a short staff session covering start-up, shutdown, trigger settings and wear-part replacement so the venue can operate it independently after handover.

Custom Options

  • Standard or custom dimensions and pose
  • Choice of motion list and trigger method
  • Indoor or outdoor-rated sealing
  • Custom color study and sound set
  • Optional on-site installation and training
FAQ

Questions About This Model

Yes, Animatronic Dilophosaurus Model (Indoor Exhibit) can be scaled up or down, and the frame is re-engineered to match the new dimensions so the motion stays balanced.

Animatronic Dilophosaurus Model (Indoor Exhibit) supports infrared, timed, remote or button triggering, and the sensor distance and action sequence are set during testing.

The outdoor version of Animatronic Dilophosaurus Model (Indoor Exhibit) uses sealed joints, UV-stable paint and a protected control box, and the rating is confirmed against the destination climate.

The footprint for Animatronic Dilophosaurus Model (Indoor Exhibit) follows the roughly 6 to 7 m long plus a service and clearance margin, and we confirm the exact base dimensions against your site drawing before production.

Yes, the control board for Animatronic Dilophosaurus Model (Indoor Exhibit) lets staff change trigger distance, action order and volume, and quieter settings can be saved for low-season or indoor use without opening the figure.

Animatronic Dilophosaurus Model (Indoor Exhibit) is defined by there is no evidence for a neck frill or venom; those traits came from fiction, while the real animal is defined by its double crest. The sculpt and panels can be aligned to communicate that point.